Vorwerk Thermomix TM 31 Instruction Manual Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 42
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
1
2
34
Clockwise/counter-clockwise operation
Press the button on the control panel
1
to reverse the rotating direction
of the mixing knife from clockwise to counter-clockwise. Pressing
button is
possible at any speed selection and
.
Counter-clockwise operation is indicated by the
symbol on the display.
To switch off counter-clock-wise operation just press the
button again.
Counter-clockwise operation is intended for gently stirring delicate food
which is not to be chopped.
Dough mode
Use dough mode
2
to make heavy yeast dough or bread dough. To activate the
dough mode set the speed selector to
and press the button on the control
panel.
This will start the alternating operation to process the dough evenly in the
mixing bowl. This is an imitation of a special kneading procedure used in the
baking trade to achieve a high-quality dough.
Dough mode is only available if the mixing bowl has cooled down after cooking
to a temperature below 60°C (140°F). If the temperature is higher, a buzzer
will sound. To prevent accidental heating of bread dough the electronic system
blocks the heating system, Turbo button and counter-clockwise/clock-wise
button when dough mode has been selected.
NOTICE
Thermomix TM31 can move
Place your Thermomix TM31 on a clean, solid, even and non-heatable
surface so that it cannot slip. Keep a sufficient distance from the edge of
this surface to prevent Thermomix TM31 from falling down.
When preparing dough or chopping food, an imbalance can develop in the
mixing bowl which, under certain circumstances, may cause the whole
appliance to move. Do not, therefore, leave the appliance unattended while
it is operating as it might fall from the work surface.
WORKING WITH THE THERMOMIX TM31
Working with the Thermomix TM31
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 41 42

Comments to this Manuals

No comments